RESISTANCE TO EXTREME TEMPERATURES
1. TEMPERATURE SHOCK
The ACTION-X3 can pass from -40°C to +60°C in less than a minute (repeated 3 consecutive times).
2. HIGH TEMPERATURE
When stabilised at a temperature of 60°C for over 4 hours, the ACTION-X3 won’t show any sign of surface deterioration. Its functional use (calls, sms’s…) is guaranteed at 55°C for 2 hours.
3. LOW TEMPERATURE
When stabilised at a temperature of -40°C for 4 hours, the ACTION-X3 won’t show any sign of surface deterioration. Its functional use (calls, sms’s…) is guaranteed at -25°C for 2 hours.
FLUID RESISTANCE
4. RAIN
The ACTION-X3 is exposed to harsh weather conditions for 30 minutes on each one of its 6 faces i.e. 3 hours of harsh conditions (a flow of 10cm/hr i.e. droplets of up to a 4.5-mm diameter with bursts of 65 km/hr).
5. SALT FOG
A sodium chloride solution (5%, neutral pH) is sprayed on the ACTION-X3. Spraying and drying are then alternated in cycles of 24 hours for 4 days in very warm conditions (temperature of 35°C).
6. CONTAMINATING FLUIDS
A solvent (2-propanol) is sprayed for 24 hours.
RESISTANCE TO MOTION
7. VIBRATION
The ACTION-X3 undergoes prolonged exposure (8 hrs) to heavy shaking on every axe (X,Y,Z).
8. SHOCK TESTING
18 shocks are performed i.e. 3 on each of the 6 faces.
9. ACCELERATION
Acceleration is performed on the ACTION-X3 along the 6 directions, passing from 0 to 72 km/hr in 1 second.
RESISTANCE TO SEVERE WEATHER CONDITIONS
10. RESISTANCE TO ALTITUDE (low pressure)
The ACTION-X3 is switched on for an hour in a depressurized chamber at 57kPa which corresponds to using the phone at over 4000 metres.
11. SUN (UV) RADIATION
The ACTION-X3 is exposed to conditions that correspond to spending over a week in the areas of the world that are most exposed to UV rays (using Xenon lamps to reproduce sunlight wavelengths, from ultraviolet to infrared). This test is carried out with an exposure peak of 1120W/m2 inducing a temperature with a potential to reach 49°C.
Certified = no alteration in look, materials or functional features after testing.